CABLE REQUEST FORM
PRODUCTS
MENÜ
-
Alçak Gerilim Kabloları
- Instrumentation Cables
- Overall Shielded- Unarmoured
- Overall Shielded-Armoured
- Individual Shielded -Unarmoured
- Individual Shielded - Armored Cables
- FireKab Instrumentation Cables
- PAS 5308 Cables
- Control Cables
- Power Cables
- Marine & Shipboard Cables
- Indoor Telephone and Fire Alarm Cables
- Data Transmission Cables
- Servo Motor Cables
- Cathodic Protection Cables
- UL Certified Cables
- Solar Cables
-
Yangına Dayanıklı Kablolar
FireKab RE-2G(St)HSWAH…CI
HSWAH...CI.png)
SHARE
Areas of Use
Used for communication and instrumentation purposes in industries like oil exploration, cement, paper, steel, power generation as well as in intrinsically safe systems in hazardous areas like petrochemical plants and thermal power plants to monitor measuring equipment in process automation applications. HFFR types are less flammable in case of fire, mostly self-extinguishing, have low smoke density and they do not emit poisonous and corrosive gasses during a fire. Armoured types provide mechanical strength and protect the cable core against outer mechanical effects. Also, min.180 minutes of circuit integrity under fire conditions is achieved by its special design.
Cable Construction
- Conductor Stranded Annealed Copper (IEC/EN 60228, Class 2)
- Insulation Silicon Rubber (EN 50363-1, BS 7655 EI2)
- Core Colors Multicore: White Numbered Pair: Black / White, Numbered Triples: Balck / White / Red, Numbered Quad: Black / White / Red / Blue, Numbered
- Lay-up Cores / pairs / triples / quads are stranded in layers
- Separator PET Foil
- Overall Screen Al-PET Foil (with 7x0.3 mm Tinned Copper Drain Wire)
- Inner Sheath Halogen Free Flame Retardant Compound (HFFR/LSZH/LSOH/FRNC) (EN 50290-2-27)
- Armour Round Galvanized Steel Wire (Min. Diameter 0.90 mm ±0.02 mm)
- Outer Sheath Halogen free Flame Retardant Compound (HFFR/LSZH/LSOH/FRNC) (EN 50290-2-27), RAL 2004 - Orange, RAL 9005 - Black, RAL 5015 - Blue, (other colors open request)
- Reference Standards BS/EN 50288-7
Technical Properties
- Operating Voltage 500 V*
- Test Voltage Core - Core: 2000 V; Core - Screen: 1000 V
- Conductor Resistance 0.50 mm² - ≤36 Ω/km; 0.75 mm² - ≤24.5 Ω/km; 1.00 mm² - ≤18.1 Ω/km; 1.30 mm² - ≤14.2 Ω/km; 1.50 mm² - ≤12.1 Ω/km; 2.50 mm² - ≤7.41 Ω/km
- Insulation Resistance >300 M.Ωxkm
- Capacitance Unbalance (800 Hz) ≤500 pF/500m
- Capacitance (@800Hz) ≤95 nF/km (Capacitance values may increase by 20% up to 4 pairs)
- L/R Ratio 0.50 mm²..1.00 mm² - ≤25 µH/Ω; 1.30 mm²..1.50 mm² - ≤40 µH/Ω; 2.50 mm² - ≤60 µH/Ω
- Temperature Range Fixed: -40 °C ........+90 °C, Flexible: -5 °C ........+50 °C
- Flame Retardancy IEC/EN 60332-1, IEC/EN 60332-3-24 (CAT C)
- Fire Resistance IEC 60331-21
- Smoke Density IEC/EN 61034-1
- Amount of Halogen Acid Gas IEC/EN 60754-1
- Corrosive Gases Measurement IEC/EN 60754-2
- Oil Resistance IEC/EN 60811-404, ASTM No 2 oil 70 °C 4 hours
- Min. Bending Radius (Fixed) 12 x Cable Diameter