CABLE REQUEST FORM
PRODUCTS
MENÜ
-
Alçak Gerilim Kabloları
- Instrumentation Cables
- Overall Shielded- Unarmoured
- Overall Shielded-Armoured
- Individual Shielded -Unarmoured
- Individual Shielded - Armored Cables
- FireKab Instrumentation Cables
- PAS 5308 Cables
- Control Cables
- Power Cables
- Marine & Shipboard Cables
- Indoor Telephone and Fire Alarm Cables
- Data Transmission Cables
- Servo Motor Cables
- Cathodic Protection Cables
- UL Certified Cables
- Solar Cables
-
Yangına Dayanıklı Kablolar
LIH(St)H-TP
SHARE
Areas of Use
These shielded and HFFR insulated cables are used as signal transmission cables in industrial applications. These can be easily used with their flexible construction in narrow applications like electronic control systems of computer or audio systems or the communication sector, electronic circuits, measurement devices, machine design, office equipment, etc. These used for indoor applications. Screening protects the cable from the outer electrical effects. Because of the HFFR material, These don't burn easily and the flames go off by themselves. These have low smoke density and These don't emit poisonous and corrosive gases during the fire. These used in buildings where there are important goods or human population.
Cable Construction
- Conductor Stranded Annealed Copper (IEC/EN 60228, Class 5, 0.34 mm²: Class 2)
- Insulation HFFR (EN 50290-2-26)
- Core Colors DIN 47100 or Black-White and Numbered
- Lay-up Cores are twisted as pairs and pairs are stranded in layers
- Separator PET Foil
- Drain Wire Stranded Tinned Copper
- Screen Al-PET Foil
- Outer Sheath HFFR (EN 50290-2-27), RAL 7001 - Grey
- Reference Standards VDE 0812, TS 13755
Technical Properties
- Operating Voltage 0.14 mm²..0.25 mm² 250 V; 0.34 mm²..1.50 mm² 300 V / 500 V
- Test Voltage 0.14 mm²..25 mm² 1200 V; 0.34 mm²..10 mm² 1500 V; 1.50 mm²….. 2500 V
- Loop Resistance 0.14 mm²-≤276 Ω/km; 0.22 mm²-≤170 Ω/km; 0.25 mm²-≤155.6 Ω/km; 0.34 mm²-≤112 Ω/km; 0.50 mm²-≤78 Ω/km; 0.75 mm²-≤52 Ω/km; 1.00 mm²-≤39 Ω/km; 1.50 mm²-≤26.6 Ω/km
- Insulation Resistance >200 M.Ωxkm
- Capacitance (@800Hz) Core - Core: 0.14 mm²-≤80 nF/km; 0.22 mm²..0.34 mm²-≤100 nF/km; 0.50 mm²..0.75 mm²-≤110 nF/km; 1.00 mm²..1.50 mm²-≤120nF/km; 2.50 mm²- ≤140 nF/km Core-Screen: 0.14 mm²-≤120 nF/km; 0.22 mm²..0.34 mm²-≤150 nF/km; 0.50 mm²..0.75 mm²-≤170 nF/km; 1.00 mm²..1.50 mm²-≤180nF/km; 2.50 mm²- ≤240 nF/km
- Indutance (approx.) 0.65 mH/km
- Temperature Range Fixed: -30 °C ........+70 °C, Flexible: -5 °C ........+70 °C
- Flame Retardancy IEC/EN 60332-1
- Smoke Density IEC/EN 61034-2
- Amount of Halogen Acid Gas IEC/EN 60754-1
- Corrosive Gases Measurement IEC/EN 60754-2
- Min. Bending Radius Fixed: 8 x Cable Diameter, Flexible: 15 x Cable Diameter