CABLE REQUEST FORM
CABLE REQUEST FORM
PRODUCTS

LI2Y(St)H-PiMF (RS 232 - 422)

SHARE

Areas of Use

Used for transmission of the data signal in computer, information and communication systems as well as process control for computer systems and terminals. HFFR versions are less flammable in case of fire, mostly self-extinguishing, have low smoke density and they do not emit poisonous and corrosive gasses during a fire.

Cable Construction

  • Conductor 0.22 mm² Stranded Tinned Copper (7x0.20 mm AWG 24), 0.34 mm² Stranded Tinned Copper (7x0.25 mm AWG 22)
  • Insulation PE (EN 50290-2-23, VDE 0207-2YI1)
  • Core Colors Pair 1: Black / Red Pair 2: Black / White Pair 3: Black / Green Pair 4: Black / Blue
  • Separator PET Foil
  • Individual Screen Al-PET Foil (with Stranded Tinned Copper Drain Wire)
  • Lay-up All shielded pairs are stranded in layers
  • Separator PET Foil
  • Overall Screen Al-PET Foil (with Stranded Tinned Copper Drain Wire)
  • Outer Sheath HFFR (EN 50290-2-27), RAL 7001 - Grey

Technical Properties

  • Operating Voltage 300 V
  • Test Voltage 1200 V
  • Velocity of Propagation 0,66
  • Insulation Resistance >5000 M.Ωxkm
  • Capacitance (@800Hz) Core - Core: ≤52 nF/km, Core - Cores - Screen: ≤90 nF/km
  • Characteristic Impedance 100±10 Ω
  • Loop Resistance AWG 24: ≤182 Ω/km; AWG 22: ≤115 Ω/km
  • Temperature Range -30 °C........+70 °C
  • Flame Retardancy IEC/EN 60332-1
  • Smoke Density IEC/EN 61034-1
  • Amount of Halogen Acid Gas IEC/EN 60754-1
  • Corrosive Gases Measurement IEC/EN 60754-2
  • Min. Bending Radius (Fixed) 10 x Cable Diameter