CABLE REQUEST FORM
PRODUCTS
MENÜ
-
Alçak Gerilim Kabloları
- Instrumentation Cables
- Overall Shielded- Unarmoured
- Overall Shielded-Armoured
- Individual Shielded -Unarmoured
- Individual Shielded - Armored Cables
- FireKab Instrumentation Cables
- PAS 5308 Cables
- Control Cables
- Power Cables
- Marine & Shipboard Cables
- Indoor Telephone and Fire Alarm Cables
- Data Transmission Cables
- Servo Motor Cables
- Cathodic Protection Cables
- UL Certified Cables
- Solar Cables
- Charging Cables For Electric Vehicles
-
Yangına Dayanıklı Kablolar
HSLHCH-JZ
SHARE
Areas of Use
These Halogen Free Flame Retardant cables (screened) are used for office equipment, electronic control systems, air condition systems, power stations, engineering projects for control, vision and measurement purposes. These can be used in wet or dry indoor applications. Because of the HFFR material, These don't burn easily and when These do the flames go off by themselves. These have low smoke density and These don't emit poisonous and corrosive gases during the fire. They are used in buildings where there are important goods or human population.
Cable Construction
- Conductor Stranded Annealed Copper (IEC/EN 60228, Class 5)
- Insulation HFFR (EN 50290-2-26)
- Core Colors Black (white numbered) Green-Yellow earth core in the outer layer (3 cores and above)
- Lay-up Cores are stranded in layers
- Inner Sheath HFFR (EN 50290-2-27)
- Screen Tinned Copper Wire Braid
- Outer Sheath HFFR (EN 50290-2-27), RAL 7001 - Grey
- Reference Standards TSE K 373
Technical Properties
- Operating Voltage 0.50 mm²..1.50 mm² 300 V / 500 V; 2.50 mm²…... 450 V / 750 V
- Test Voltage 2500 V
- Conductor Resistance 0.50 mm² - ≤39 Ω/km; 0.75 mm² - ≤26 Ω/km; 1.00 mm² - ≤19.5 Ω/km; 1.50 mm² - ≤13.3 Ω/km; 2.50 mm² - ≤7.98 Ω/km
- Insulation Resistance >200 M.Ωxkm
- Transfer Impedance ≤250m Ω/m (30MHz)
- Temperature Range Fixed: -30 °C ........+70 °C, Flexible: -5 °C ........+70 °C
- Flame Retardancy IEC/EN 60332-1
- Smoke Density IEC/EN 61034-2
- Amount of Halogen Acid Gas IEC/EN 60754-1
- Corrosive Gases Measurement IEC/EN 60754-2
- Min. Bending Radius Fixed: 10 x Cable Diameter, Flexible: 15 x Cable Diameter
Footnote
*Depending on the customer request, the coverage rate can be adjusted.