CABLE REQUEST FORM
CABLE REQUEST FORM
PRODUCTS

RG 11/4 FHF

SHARE

Areas of Use

This is used as a distribution cable where low attenuation is required for CATV, CCTV, cable TV, and satellite systems.

Cable Construction

  • Conductor Ø 1.63 mm Annealed Solid Copper
  • Insulation Ø 7.1 mm Physical Foamed PE
  • 1. Screen Al-PET Foil (100% Coverage)
  • 2. Screen Tinned Copper Wire Braid (55% Coverage)
  • Outer Sheath Ø 10.20 mm HFFR (EN 50290-2), White
  • Reference Standards TS 2637 IEC 60096-1, EN 50117, TS 5757 IEC 60096-3

Technical Properties

  • Operating Voltage 2 kV
  • Test Voltage 5 kV
  • Velocity of Propagation 0,82
  • Conductor Resistance ≤8.8 Ω/km
  • Insulation Resistance >2000 M.Ωxkm
  • Capacitance (@800Hz) ≤53 pF/m
  • Impedance 73±3 Ω
  • Temperature Range -30 °C........+70 °C
  • Smoke Density TS/BS/IEC/EN 61034-1+2
  • Corrosive Gases Measurement IEC 60754-2 , BS/EN 50267
  • Min. Bending Radius 100 mm

Cross Section

  • Configuration / Cross-Section (mm/mm²) Cable Diameter (mm) (± 5%) Copper Weight (kg / km) ~ Cable Weight (kg / km)
  • 1 10.0 33 108