CABLE REQUEST FORM
PRODUCTS
MENÜ
-
Alçak Gerilim Kabloları
- Instrumentation Cables
- Overall Shielded- Unarmoured
- Overall Shielded-Armoured
- Individual Shielded -Unarmoured
- Individual Shielded - Armored Cables
- FireKab Instrumentation Cables
- PAS 5308 Cables
- Control Cables
- Power Cables
- Marine & Shipboard Cables
- Indoor Telephone and Fire Alarm Cables
- Data Transmission Cables
- Servo Motor Cables
- Cathodic Protection Cables
- UL Certified Cables
-
Yangına Dayanıklı Kablolar
HBH
SHARE
Product Certificates
You can click to download our certificates.
Areas of Use
These indoor telephone cables are used in the subscriber and switchboard system. These cables have halogen-free and flame retardant insulation and sheath.
Cable Construction
- Conductor Annealed Solid Copper (IEC/EN 60228)
- Insulation HFFR (EN 50290-2-26)
- Core Colors TSE K 116, IEC 60189-2
- Lay-up Pairs and bundles (each bundle contains of 10 pairs and identified by colored spiral tape)
- Drain Core Insulated Solid Annealed Copper (white color with red ring color)
- Separator PET Foil
- Outer Sheath HFFR (EN 50290-2-27), RAL 7032 - Grey
- Reference Standards TSE K 116, IEC 60189-2
Technical Properties
- Operating Voltage 250 V
- Test Voltage 1000 V
- Conductor Resistance ≤97.8 Ω/km
- Insulation Resistance >200 M.Ωxkm
- Mutual Capacitance <120 nF/km
- Capacitance (@800Hz) ≤400 pF/500m
- Temperature Range -30 °C........+70 °C
- Flame Retardancy IEC/EN 60332-1
- Smoke Density IEC/EN 61034-2
- Amount of Halogen Acid Gas IEC/EN 60754-1
- Corrosive Gases Measurement IEC/EN 60754-2
- Min. Bending Radius (Fixed) 8 x Cable Diameter